Distance Of The Orientation Lines Behind The Vehicle » Fig; Function Surfaces » Fig; Check Proper Fitting - Skoda octavia Owner's Manual

Assembling the ball rod – Step 2
Fig. 179 Lock to lock: Key version 1 / key version 2

Read and observe on page 149 first.
Applies to the key version 1
›
Turn key in the direction of arrow
A
wards » fig. 179.
›
Remove the key in the direction of the arrow
Applies to the key version 2
›
Turn key in the direction of arrow
B
wards » fig. 179.
›
Remove the key in the direction of the arrow
Applies to both key versions
›
Fit and press in the cap on the lock in the direction of the arrow
C
» fig. 180.
›
Check the ball rod for proper attachment
152
Driving
Fig. 180
Plug cap on the lock
so that the green mark points up-
1
.
2
so that the key eyelet points down-
3
.
4
5
» page

152, Check proper fitting.

WARNING
After fitting the ball rod, always secure the lock and remove the key. The
ball rod must not be operated with the key inserted.
Check proper fitting

Read and observe on page 149 first.
Duly fortified ball rod » fig. 181
The ball rod does not come off the mounting recess even after strong

"shaking".
Operating lever is up as far as it goes .
A

The release pin is completely exposed (both its red and green parts are
B

visible).
The key is removed and the cap

Removing the ball rod– Step 1
Fig. 181
Duly fortified tow bar
attached to the lock.
C
Fig. 182
Remove the cap from the lock
