The expiry date stated on the tyre inflation bottle
▶
has expired.
Self-help
Seal the tyres
›
Unscrew the valve cap from the damaged tyre.
›
Unscrew the valve core with the valve insert and
place it on a clean surface.
›
Shake the tyre inflation bottle back and forth with
sealant.
›
Screw the inflation hose onto the tyre inflater bot-
tle. The film on the closure is pierced automatically.
›
Remove the plug from the inflation hose and push
it fully onto the tyre valve.
›
Hold the bottle with the bottom facing upwards
and fill all of the sealing agent into the tyre.
›
Remove the filler plug from the valve.
›
Screw in the valve insert.
Inflate tyres
›
Fit the tyre inflation hose of the air compressor to
the tyre valve.
›
Secure the vehicle with the parking brake.
›
Start the engine.
›
Plug the connector into the 12 volt socket .
›
Turn on the air compressor.
›
Once a tyre pressure of 2.0-2.5 bar is reached, turn
off the air compressor.
Observe the maximum running time of the air com-
pressor according to the directions of the repair kit
manufacturer.
›
If an air pressure of 2.0 - 2.5 bar has not been
reached, remove the tyre inflation hose from the
valve.
›
Drive approx. 10 metres forwards or backwards to
allow the sealing agent to distribute in the tyre.
›
Replace the tire inflation hose on the valve and re-
peat the inflation procedure.
Tyre pressure
What you should be mindful of
NOTICE
Always adjust the tyre pressure to the load.
▶
Check the pressure in all tyres at least once a
▶
month and before each longer ride.
Check the pressure when the tyres are cold. If nec-
▶
essary, do not reduce the elevated pressure when
the tyres are warm.
Wheels ›
After each tyre pressure change, save the new val-
▶
ues in the tyre pressure monitoring system.
WARNING
Risk of an accident!
If tyre pressure loss is very quick, try to stop the ve-
hicle carefully without heavy steering or heavy brak-
ing.
Sticker with prescribed tyre pressures
The sticker with prescribed tyre pressures is located
on the inside of the fuel filler flap.
ches - this information only serves as informa-
tion for the prescribed tyre pressure. This is not
a listing of approved tyre sizes for your vehicle.
These are included in the technical vehicle docu-
mentation and in the declaration of conformity
(in the so-called COC document).
Tyre pressure reading for the front axle tyres
E
Tyre pressure reading for the rear axle tyres
F
Prescribed tyre pressure value for the emergen-
G
cy wheel
Tyre pressure monitoring system
Functionality
The tyre pressure monitoring indicator indicates a
change in tyre pressure.
Warning when pressure changes
Illuminated - Tyre pressure change
›
Stop the vehicle.
›
Check the tyres and tyre pressures.
Show tyres with modified pressure
›
In Infotainment, select the following menu.
Vehicle status
Or:
Vehicle status
Tyre pressure
149
Tyre pressure at
A
partial load
Tyre pressure for
B
environmentally
friendly operation
(slightly lower fuel
consumption and
pollutant emissions)
Tyre pressure at full
C
load
Tyre diameter in in-
D