Table of Contents
Advertisement
Remote Operation from a Touch Tone Phone
Direct Remote Operation
Once you have entered the remote code (p. 62), you can also control your unit by
direct commands instead of using the voice menu. To end the remote operation,
hang up at anytime.
Direct commands
[4]:
Plays back new messages.
[5]:
Plays back all messages.
[1]:
Repeats the current
message.
• If pressed within the first 5
seconds of playback, the
previous message will be
played.
[2]:
Skips the current message.
[9]:
Stops the current operation.
• To resume operation, enter a
direct command within 15
seconds, or the voice menu
will start (p. 63).
Turning on the Answering System
Call your unit and wait for 12 rings.
• The unit will answer and the greeting will be played.
• The Answering System will turn on. Hang up or enter the remote code for other
options.
• When turning on the Answering System using a rotary or pulse service telephone,
you cannot enter the remote code for other options.
Skipping the greeting
After calling your unit, press [ ] during the greeting.
• The unit skips the rest of the greeting and you can start recording your message
after the long beep.
64
[ ] [4]: Erases the current
message.
• A beep will sound and the
next message will be played.
[ ] [5]: Erases all messages.
• A long beep will sound, and
"No messages" will be heard.
[0]:
Turns off the Answering
System.
• The unit hangs up.
Advertisement
Table of Contents
