Filling The Water Tank - Asko BO4CS2T1-42 OCS8476S Operating Instructions Manual

FILLING THE WATER TANK

The tank allows for independent water supply to the steamer. The tank volume amounts to approx. 1.2 litres (maximum
water level – see marking).
Clean the water tank before the fi rst use.
Always fi ll the water tank with clean and cool water from the
pipeline, bottled water without additives, or distilled water
suitable for use in cooking. Water that is poured into the
water tank should be at a temperature of 20 °C +/- 10 °C.
Apply pressure to open the water tank door.
1
klik klik
Remove the water tank from the housing by grabbing
2
the notch.
Open the water tank cover and wash it with water.
3
Before use, add fresh water up to the MAX marking
on the tank.
MAX MAX
Push the water tank back into the housing to the
4
position in which the position switch is activated.
Then, press the tank door to close it.
After the cooking process, the remaining water in the
steam system is pumped back into the water tank. Empty,
clean, and dry the water tank. Add fresh water to the tank
before next use.
11