Table of Contents
Advertisement
MAINTENANCE
Cleaning the Water Tank Filter
If the water tank filter is dirty, you can clean it under the tap.
1. Remove the suction tube with the filter.
2. Clean it out under the tap and put it back into position. Ensure that the filter touches the
base of the water tank.
Descaling
During the steam process, there can be an accumulation of mineral deposit in the steam system.
This needs to be removed from time to time. You need to carry out this task when the 'Appliance
needs descaling' notification is shown. If the appliance is not descaled after three notifications,
the steam functions will no longer be available. Use this function only when the oven has cooled
down fully. The descaling process comprises descaling and rinsing. Notifications with information
and requests for actions will be shown on the display during the process.
1. Pour water mixed with descaling agent into the water reservoir. Consult the descaling agent
instructions for the correct mixing ratio.
2. Open the 'Settings' menu and select 'Cooking settings'.
3. Select 'Steamer settings'.
4. Select 'Descaling' to select the function.
5. Touch the confirm key to start descaling.
We advise using NOKALK for descaling. NOKALK is an extremely efficient descaling
agent based purely on natural, entirely biodegradable ingredients. The solution is
non-corrosive, not aggressive and is environmentally-friendly. As well as an effective
descaling action, it also has a cleansing and anti-bacterial effect, ensuring that the
appliance's internal components are preserved in an optimum hygienic state. Therefore
food's good taste is preserved and the appliance's service life is extended.
•
Water is used for the steaming process. Water contains calcium and magnesium.
Heat causes the water to condense, leaving a mineral deposit (not harmful to humans).
•
If the descaling cycle is interrupted prior to the end of the cycle, the program must be
restarted from the beginning.
EN 28
Advertisement
Table of Contents
