Table of Contents
Advertisement
FILLING THE WATER TANK
The tank allows for independent water supply to the steamer. The tank volume amounts to approx. 1.2 litres (maximum
water level – see marking).
Clean the water tank before the fi rst use.
Always fi ll the water tank with clean and cool water from the
pipeline, bottled water without additives, or distilled water
suitable for use in cooking. Water that is poured into the
water tank should be at a temperature of 20 °C +/- 10 °C.
Apply pressure to open the water tank door.
1
klik
2
3
on the tank.
MAX
4
klik
Then, press the tank door to close it.
steam system is pumped back into the water tank. Empty,
clean, and dry the water tank. Add fresh water to the tank
before next use.
Remove the water tank from the housing by grabbing
the notch.
Open the water tank cover and wash it with water.
Before use, add fresh water up to the MAX marking
Push the water tank back into the housing to the
position in which the position switch is activated.
After the cooking process, the remaining water in the
11
Advertisement
Table of Contents
