Using The Steam Clean Function To Clean The Oven - Asko BO4CS2T1-42 OCS8476S Operating Instructions Manual

USING THE STEAM CLEAN FUNCTION TO CLEAN THE OVEN

Before running the Steam Clean program, add fresh water into the water tank.
After starting the program, wait until the time indicated on the screen expires (13 minutes).
When the Steam Clean program is complete, wait for the oven to cool down suffi ciently so that you can wipe the oven
interior safely, without burning yourself.
Use the Steam Clean function after the oven has fully cooled down.
Cleaning depends on the water hardness level.
Water hardness
Soft
Slightly hard
Medium hard
Hard
Very hard
We recommend using the DeLonghi descaling agent as it delivers quality results of the steam system cleaning process.
The following note will appear on the display: »Please run the descaling procedure.« The notes on the display will
guide you through the descaling procedure.
1. Add the descaling agent into the water tank (diluted in water at a ratio of 1:8).
2. Descaling procedure is in progress.
3. Descaling procedure complete. Please remove the liquid, rinse the water tank and add fresh water for the rinsing
process.
4. Rinsing process complete. Clean the tank and the oven.
Also clean the fi lter foam (see chapter CLEANING THE FILTER FOAM)
46
Choose "Extra/Additional Functions" in the main menu and select the Steam
Clean symbol. Confi rm the setting by pressing on the KNOB.
Press the START key.
°N
water in litres before
descaling is required
0-3 dH
3-7 dH
7-14 dH
14-21 dH
>21 dH
Estimated use of Number of coloured
stripes on the test strip
100
70
50
35
25
4 green stripes
1 red stripe
2 red stripes
3 red stripes
4 red stripes