Table 5-4 Description of Match Incoming Calls Settings
Items
Call Source
Inbound Caller Pattern
Enable Callback
Table 5-5 Description of Handle Matched lncoming Calls Settings
Items
Call Destination
Hotline
Outbound Dial
Pattern
Strip
Prepend
Figure 5-4 Detailed Mode Route
Description
Choose the trunk or trunk group for the incoming calls.
Match the prefix of caller ID for incoming calls.
Wether to enable callback feature.
Description
Choose the trunk or trunk group to route the incoming calls
to.
Direct number to the SIP Server. The parameter is ignored
if a SIP Account is selected on this route.
Outbound calls that match this dial pattern will use this
outbound route.
Allows the user to specify the number of digits that will be
stripped from the front of the phone number before the call is
placed. For example, if users must press 0 before dialing a
phone number, one digit should be stripped from the dial
string before the call is placed.
These digits will be prepended to the phone number before
TA410/810 User Manual
30/63