Yeastar Technology TA810 User Manual page 12

2) Call Duration Settings
Table 3-2 Description of FXO Port Call Duration Settings
Items
Single CallMax Duration(min)
Round up Duration
Max. Call Duration(min)
Enable Clear Stat.
Balance Alarm Settings
6 - 370 Ohm + (820 Ohm || 110nF)
7 - 275 Ohm + (78 Ohm || 150 nF)
8 - 120 Ohm + (820 Ohm || 110 nF)
9 - 350 Ohm + (1000 Ohm || 210nF)
10 - 0 Ohm + (900 Ohm || 30nF)
11 - 600 Ohm + 2.16 uF
12 - 900 Ohm + 1 uF
13 - 900 Ohm + 2.16 uF
14 - 600 Ohm + 1 uF
15 - Global complex impedance
Figure 3-2 FXO Port Call Duration Setting
Description
Configure the duration of each call, it's 0 by default,
which means no limit.
Once the value of Billing Unit is changed, the
"Round Up Duration" will be cleared, "Call
Duration" will also change accordingly.
Defines the maximum number of billing unit called
within a month through the trunk. To disable this
limitation set the value at 0.
The date to clean the duration status each month.
When Max. Call Duration(min) is configured a 0 (no
TA410/810 User Manual
12/63