SKC QuickTake 30 Operating Instructions Manual page 6

Air sampling pump
Table of Contents

Advertisement

Run Time Features:
Flow Fault Features:
Media Compatibility:
Tubing:
Housing:
Dimensions:
Weight:
Indicates a warning, caution, or note
User-selectable features, user-adjustable presets (see
Advanced Setup)
Preset timed runs:
Manually set continuous
run with manual shut-off: 1 to 999 min (repeats 1 to 999-min
Intermittent sampling:
If the pump is unable to compensate due to excessive back
pressure, the pump will go into fl ow fault mode (see page 18 for
details). Flow fault features are enabled as the default setting.
Flow fault may be disabled at the user's option.
See Advanced Setup.
Flow fault:
Flow fault displays immediately
Pump shuts off after 5 seconds
Fault restart: Pump attempts restart every 10 seconds
up to fi ve times
Viable cascade impactors, spore trap cassettes (e.g., VersaTrap),
asbestos cassettes, microvacuum cassettes, and other impaction
samplers that require fl ows from 10 to 30 L/min
Requires 3/8-in ID tubing
ABS plastic
9.3 x 8.4 x 3.5 in (23.6 x 21.3 x 8.9 cm)
4.8 lbs (2.2 kg)
www.skcinc.com
1, 2, 5, 10, or 15 min
runs indefi nitely until user stops
pump or power supply is depleted)
See Advanced Setup
5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the QuickTake 30 and is the answer not in the manual?

Table of Contents