SKC QuickTake 30 Operating Instructions Manual page 23

Enabling/Disabling Alarm and Fault Features
1. Press the security code
2. Press CAL. The pump software version number will display briefl y.
3. Press  or  to turn feature on or off (see below). Press
feature.

4. Press [ ] to exit feature setup. Press [
presets.
Feature
Button Beeper: On/Off
Alarm Beeper: On/Off
Flow Fault: On/Off
Flow Fault Restart: On/Off
Resetting Pump to Manufacturer Default
Settings
1. Press the security code
butt on. The pump software version number will display
briefl y.

2. Press repeatedly to scroll through until the LED
displays dEFt.

3. Press [ ]. The word no will appear on the display.
To reset to factory default sett ings: Press
will appear on the display. Press [
To retain existing sett ings: Press
no and press [
The number 30 will appear briefl y, then the display will return
to run time presets.



].
to enter setup mode.

] again to return to run time
ON
Digital display:
Button beep on
Digital display:
Alarm beep on
Digital display:
Flow fault on
Digital display:
Flow restart on
and then press the CAL

. YES

].

to scroll to
22

to advance to next
OFF
Digital display:
Button beep off
Digital display:
Alarm beep off
Digital display:
Flow fault off
Digital display:
Flow restart off
Digital display:
Pump default
Digital display:
Yes, reset to pump default
Digital display:
No, do not reset to pump
default