SKC QuickTake 30 Operating Instructions Manual page 10

Air sampling pump
Table of Contents

Advertisement

Operating from AC Power
The QuickTake 30 may be run using AC power with the batt ery and AC
charger/adapter. Insert the charger plug into the jack on the pump and the
charger into a standard wall outlet. Operate the pump.
Cautions, Warnings, and Notes
• The charge light on the LED will fl ash if the batt ery is charging during AC
operation.
• The AC charger/adapter can be used to extend batt ery run time, but it
is not a batt ery eliminator. Therefore, it will not provide indefi nite run
times.
• Do not operate or charge the pump in hazardous locations.
• Use only the SKC-approved batt ery and charger for this pump. Use of an
unapproved batt ery and/or charger may damage the batt ery and the pump
and voids any warranty.
• To reduce risk of injury, fi re, or electric shock, always follow basic safety
precautions when using this product.
• Do not submerge the pump or subject it to any liquids.
• Protect the sample pump from weather when in use outdoors.
• Tampering with the batt ery pack or using a repaired or rebuilt batt ery
pack voids any warranty and UL Listing for intrinsic safety.
• Do not open, disassemble, short circuit, crush, incinerate, or expose the
batt ery to fi re or high temperatures.
• Failure to follow warnings or cautions voids any warranty.
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the QuickTake 30 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents