Ordering Information - SKC QuickTake 30 Operating Instructions Manual

Ordering Information

QuickTake 30 requires 3/8-inch ID tubing.
Description
QuickTake 30 Sample Pump*
tubing adapters; requires Cat. No. 223-245 charger accessory below
QuickTake 30 Sample Pump*
battery pack, AC charger/adapter (100-240 V), cassette and tubing
adapters, and tubing
QuickTake 30 Sample Pump,*
pump with battery pack, AC charger/adapter (100-240 V), cassette and
tubing adapters, rotameter, and tubing
QuickTake 30 BioStage Pump*
described above, Standard BioStage Impactor, mounting bracket with
inlet adapter, calibration adapter, rotameter, and deluxe carry case
Replacement Parts
Replacement Inlet Filters, pk/50
Stem Tubing Adapter, pk/2
Cassette Adapter
Reducing Adapter for Tubing, 3/8 inch to 1/4 inch, pk/2
Replacement Battery Pack*
Replacement Stack for QuickTake 30
Accessories
Charger/Adapter, 100-240 V
Defender Primary Standard Calibrator, 300 ml/min to 30 L/min,
includes lead-acid battery, multi-plug charger (100-240 V), DryCal
Pro Software, 39-inch (1-meter) serial cable, and leak test caps
Sampling Wand, telescopes to 34 inches (0.9 meter) for ductwork and
hard-to-reach locations; includes 6 feet (1.8 meters) of tubing
Mounting Bracket for BioStage Impactor includes inlet adapter
Rotameter, 3 to 30 L/min
Tygon Tubing, 3/8-inch ID
* Pump contains Li-Ion batt ery and may be subject to special shipping regulations.
† Use in non-explosive environments only. Not UL Listed for intrinsic safety
Cautions:
• Use only SKC-approved parts to ensure reliable performance. Failure to do so
voids any warranty.
• Failure to follow warnings and cautions voids any warranty.
includes battery pack and cassette and
†
and Charger includes pump with
†
Rotameter, and Charger includes
†
Kit includes pump and charger as
†
24
10 feet
50 feet
Cat. No.
228-9530C
228-9530
228-9530A
228-9530K
P40021A
P31239
P33100
P31211
P75689
P21266
223-245
717-510H
228-9521
228-9531
320-100
225-1351
225-1352