Operating Instructions
4.
Click the
dialogue box appears.
5.
In this box, confirm if the Use a proxy server check box is checked or not.
Confirm if the check
box is checked or not.
If the check box is not checked, web browser setting for a proxy server is
not necessary and click
If the check box is checked, click
Settings dialogue box appears.
6.
Enter "192.168.0.253" (or your acquired IP address of Network Camera from
network administrator) into the Do not use proxy server for addresses
beginning with data field.
7.
OK
Click
1.5.3 Confirmation of the Network setup
The Network Camera has a built-in web server function. If you can access Top
Page of the Network Camera, the setup of the computer and the Network Camera
has been successfully made.
Follow the steps below and confirm the setup.
LAN Settings...
. And setting is completed.
[For assistance : 1-800-272-7033]
button. The Local Area Network [LAN] settings
Cancel
button and skip the following procedures.
Advanced...
When checked, click
Advance... button.
button and the Proxy
27