Panasonic KX-HCM10 Operating Instructions Manual page 28

1.
On the computer, start up your web browser.
2.
Enter "http://IP Address (or URL):Port No." in the address field of your web
browser and press
need to input Port No..
• If the Top Page of the Network Camera appears as below, the setup is
completed.
• If the Top Page does not appear, please check the following items:
1.
Make sure that you typed in the correct IP address and Port No. to your
browser "http://192.168.0.253:80" or other if changed from the factory
default setting. When Port No. is set as 80 (default), you don't need to
input Port No..
2.
Make sure that the settings of the Network Camera and your computer
described in the sections 1.5.1 Setup the Network Camera,
1.5.2 Setup the Computer are correct.
Also check sections 1.4.4 Connecting the Network Camera to
Network and 1.4.5 Turning on the Network Camera.
28
Enter
. When Port No. is set as 80 (default), you don't
Operating Instructions