Network Setup Screen [Network] - Panasonic AW-UE150WP Operating Instructions Manual

Web screen configurations (continued)

Network setup screen [Network]

Configure network settings in the Network setup screen.
The Network setup screen [Network] consists of [Network] and
[Advanced].
Network setup screen [Network]
„ „
Click the [Network] of the Network setup screen [Network].
The setting is confirmed with the [Set] button.
The following information is required to configure network settings.
Consult your network administrator or Internet service provider.
• IP address
• Subnet mask
• Default gateway (when using a gateway server or router)
• HTTP port
• DNS primary and secondary server addresses (when using DNS)
z IPv4 network
„
DHCP [On, Off]
Select the method in which the IP address is configured.
Factory settings: Off
<NOTE>
• When [DHCP] is set to [On], AW-RP150's automatic configuration of
IP address (AUTO IP) cannot be used.
IP address(IPv4)
Input the unit's IP address here when the DHCP function is not
going to be used. Input an address that will not duplicate an existing
IP address which has been set for a personal computer or another
network camera.
Factory settings: 192.168.0.10
<NOTE>
• Multiple IP addresses cannot be used even when the DHCP
function is used. For details on the DHCP server settings, consult
your network administrator.
Subnet mask
Input the unit's subnet mask here if the DHCP function is not going to
be used.
Factory settings: 255.255.255.0
Default gateway
Input the unit's default gateway if the DHCP function is not going to
be used.
Factory settings: 192.168.0.1
<NOTE>
• Multiple IP addresses cannot be used for the default gateway even
when the DHCP function is used.
For details on the DHCP server settings, consult your network
administrator.
DNS [Auto, Manual]
Whether the DNS server address is to be acquired automatically
(Auto) or manually (Manual) is input here.
If [Manual] has been selected, the DNS settings must be established.
If [Auto] is selected when the DHCP function is going to be used, the
DNS server address is acquired automatically.
For details, consult your system administrator.
Factory settings: Manual
Primary server address
Secondary server address
Input the IP address of the DNS server if the [Manual] setting has
been selected for [DNS].
For details on the IP address of the DNS server, consult your system
administrator.
115