Panasonic KX-HCM10 Operating Instructions Manual page 54

***: Numeral characters only (1-65535)
Over write setting
It is possible to select from [Over Write to Fix Upload File Name] or [Add
time stamp to Upload File Name].
k.
Mail :
Please setting the following items.
Server Address* or Host Name**.
From (Reply)***: Enter the e-mail address of [from]. You can enter here
same as [To] when you have just one e-mail address.
To ***: Enter the e-mail address of receiver of e-mail.
Subject & Text ****: Subject and Text of transmitting e-mail.
*: Same as the character setting of IP Address.
**: Can not use [Space], ["], ['], [#], [&], [%], [=], [+], [?], [<], [>], [:] (only
ASCII character codes 33-126)
***: Can not use [Space], ["], ['], [#], [&], [%], [=], [+], [?], [<], [>], [:] (only
ASCII character codes 33-126) and Need the [@] and domain name of
e-mail, such as [text] + [@] + [text] + [.] + [text] .
****: Can not use ["], ['], [#], [&], [%], [=], [+], [?], [<], [>], [:] (only ASCII
character codes 32-126).
Note
The mail function of this camera will only operate correctly with mail
servers using SMTP (Simple Mail Transfer Protocol). It cannot be used
with Internet accessed mail servers like "Hotmail" or others which are
accessed via your browser. In most cases, for security reasons, you
must use the mail server of the Internet provider you are connected to
while using the camera.
l.
It can select the [No Message], [Mail]
Mail: It will be sent the e-mail when Alarm occurs in enable time. Please
setting the each items*.
* Same as the Mail character setting of Transfer Method.
54
Operating Instructions