Panasonic KX-HCM10 Operating Instructions Manual page 51

Operating Instructions
• To reset the current settings, click
Then it returns to Setup Page, without saving setting value.
• To clear the buffered image, click
3.
When you have finished, click
• The setting will be saved.
CAUTION
• When you click the
cleared.
• Buffered images are erased by power stop, restart, Update Firmware, Reset
to Factory Default.
Transfer in the Alarm Mode
• It is possible to transfer the image using FTP or Mail, when an alarm is
generated.
1.
Click the Alarm button on the Image Transfer page.
The next screen appears.
Clear Buffered images
[For assistance : 1-800-272-7033]
Cancel
Clear Buffered images
Save
.
button, all buffered images are
.
.
51