Setup The Computer - Panasonic KX-HCM10 Operating Instructions Manual

Panasonic network camera operating instructions kx-hcm10
Hide thumbs Also See for KX-HCM10:
Table of Contents

Advertisement

Operating Instructions
Note
The Network Camera is automatically reset after setting up the
Network Configuration.
When the following message is displayed, the IP address seems to be
overlapped.
Verify the IP Address to the network administrator, and enter the correct
IP address.
Please click
If you want to open the Top Page, Click
Refer Section 1.5.3 Confirmation of the Network setup after this
operation.
Note
If the Top Page does not appear, setup of your computer is required
following Section 1.5.2 Setup the Computer.
If you set DHCP , please click
1.5.1-4 to open the Top Page.

1.5.2 Setup the Computer

When the proxy server is not used
When the proxy server is used
If the proxy server is not used, please go to Section 1.5.3 Confirmation of the
Network setup.
OK
. And then, next screen is displayed.
[For assistance : 1-800-272-7033]
OK
.
Open the Top Page
: The following setup is not necessary.
: The following setup is necessary.
button in Section
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents