Panasonic KX-HCM10 Operating Instructions Manual page 85

Operating Instructions
Problem
Update Firmware is
not carry out a normal
end.
If you cannot solve
your problem
When it becomes impossible to access a camera by the
reason of power supply OFF, network troubles, and others at
the time of Update Firmware, it connects in the following
procedure.
The power supply of a camera and Computer is re-switched on.
The IP address when the ability to have accessed normally is specified
to be URL of a browser, and access is tried to a camera.
The CLEAR SETTING button of a camera is pushed.
Then, reconfigure the Network Camera with Network
Configuration software in CD-ROM. And access again.
Please check the
Setup Page version No.
Is the Version
wished number?
• Call our customer call center at
1-800-272-7033
• After the limited warranty, call our Continued Services
Technical Support Line at
1-900-555-PANA(1-900-555-7262)
[For assistance : 1-800-272-7033]
Cause and Remedy
Can you access the camera?
No
Is the screen displayed Top Page?
Yes
It is the same as that of usual
Update Firmware. Please perform
Update Firmware according to
Page 65.
No
Yes
Update Firmware is completed.
Yes
No
85