Using The Functions - Panasonic KX-HCM10 Operating Instructions Manual

No.
(6) Top View Image
(7) Image Transfer
(8) Camera Setup
(9) Multi-Camera
(10) Digital Output Control Digital output setting (Open or Short to GND)
(11) LED Control
(12) Restart
(13) Update Firmware
(14) Reset to Factory
Default
(15) Help

2.4.1 Using the Functions

Go to Top Page
Top Page screen allows you to select the Top Page items.
1.
Click the
See the Network Camera Top View Image Screen.
Network
Network screen allows you to set the following Network parameters.
• You can set disable Network Configuration from Setup Program of CD-ROM
for network security.
• You can set up the Port No., Static/DHCP , Default Gateway, DNS, DDNS, MAX
Bandwidth Usage. (Network Setup items of this section are as same as Setup
items of CD-ROM.)
42
Item
Image Resolution, Image Quality, Regularly Refresh
interval setting.
Trigger: mode, time, method, buffering, mail & FTP
setting.
White Balance, Power line frequency, Pan/Tilt/
Brightness setting.
Multi-Camera setting (up to 4 cameras)
Power LED Control setting. (ON or OFF)
Restart the Network Camera with all the parameters
preserved.
Update Firmware setting.
Initialize all the parameters to the factory preset.
Provides you with instructions about the commands
and functions of the Network Camera Setup Page.
Go to Top Page
button on the Network Camera Setup Page.
Operating Instructions
Description