Panasonic KX-HCM10 Operating Instructions Manual page 19

Operating Instructions
1.
Setup Connection
It is necessary to connect locally PC and Network Camera, as follows.
2.
Insert the Setup CD-ROM in the CD-ROM Drive of your computer. The
following screen is displayed.
(If the screen does not appear, please open "setup.exe" file in the CD-ROM.)
3.
After confirmation of connecting of the Network Camera to a network, turn on
the power again.
4. Network Configuration
Click
The following Network Camera List is displayed.
(Without Ethernet Hub, you should use Category 5 Cross Cable.)
or
(Category 5 Straight Cable)
or
button.
[For assistance : 1-800-272-7033]
Ethernet Hub
Router
19