General Specifications and ...
Speed accuracy (open loop)
All control characteristics are based on a 4-pole asynchronous motor
Surroundings
Enclosure type A
Enclosure type B1/B2
Enclosure type B3/B4
Enclosure type C1/C2
Enclosure type C3/C4
Enclosure kit available
Vibration test enclosure A, B, C
Relative humidity
Aggressive environment (IEC 60068-2-43) H
Test method according to IEC 60068-2-43 H2S (10 days)
Ambient temperature (at 60 AVM switching mode)
- with derating
- with full output power of typical IE2 motors (up to 90% output current)
- at full continuous FC output current
1)
For more information on derating see chapter 9.6 Special Conditions
Minimum ambient temperature during full-scale operation
Minimum ambient temperature at reduced performance
Temperature during storage/transport
Maximum altitude above sea level without derating
Maximum altitude above sea level with derating
Derating for high altitude, see chapter 9.6 Special Conditions
EMC standards, Emission
EMC standards, Immunity
See chapter 9.6 Special Conditions
Control card performance
Scan interval
Control card, USB serial communication
USB standard
USB plug
CAUTION
Connection to PC is carried out via a standard host/device USB cable.
The USB connection is galvanically isolated from the supply voltage (PELV) and other high-voltage terminals.
The USB connection is not galvanically isolated from protection earth. Use only isolated laptop/PC as connection to the
USB connector on or an isolated USB cable/converter.
MG11BC02
Design Guide
IP 20/Chassis, IP 21kit/Type 1, IP55/Type12, IP 66/Type12
5% - 95% (IEC 721-3-3; Class 3K3 (non-condensing) during operation
S test
2
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6
Danfoss A/S © Rev. 06/2014 All rights reserved.
30-4000 rpm: Maximum error of ±8 rpm
IP 21/Type 1, IP55/Type12, IP 66/12
IP 21/Type 1, IP55/Type 12, IP66/12
IP21/NEMA 1/IP 4
EN 61800-3, EN 61000-6-3/4, EN 55011, IEC 61800-3
EN 61800-3, EN 61000-6-1/2,
USB type B "device" plug
IP20/Chassis
IP20/Chassis
on top of enclosure
X
1.0 g
class Kd
1)
max. 55° C
max. 50 ° C
1)
max. 45 ° C
1)
0 °C
- 10 °C
-25 - +65/70 °C
9
1000 m
3000 m
5 ms
1.1 (Full speed)
159
9
Need help?
Do you have a question about the FC 102 and is the answer not in the manual?