Creating A Multi-Record File - Cygnus 1 Operation Manual

CREATING A MULTI-RECORD FILE

Create a new Multi-Record File
Filename to be sent to Gauge
Click in the
characters, made up of numbers and letters
Number of Records
Click in the
Number of Readings
Click in the
Open an existing Multi-Record File
An existing Multi-Record file can be used as a template to create new files :
Click on the Open button
The Open Multi-Record File dialog window will open :
Navigate to the location of the existing Multi-Record file required, and then double-
click on the filename
The file will open and its values will be copied into the boxes in the
Record File
window : edit the Filename and Dimensions if required
Save and close the new File
Click on the Save As button to save this new File
Save Multi-Record File
The
Click the Save button to save the suggested filename into the current directory
Or : change the Filename and/or Directory if desired, then click Save
The new file is now saved to disk, ready for use in a new datalogging session.
Creating Template-Files Using CygLink
box, then enter a name of up to 8
box, then enter a number between 1 and 9999
box, then enter a number between 1 and 100
dialog window will open :
Create a Multi-
55