Cygnus 1 Operation Manual page 29

Establishing the datalink from the Gauge to the PC
With all connections from the Gauge to the PC in place : turn the PC on, then turn on the
power to the Gauge :
Start the CygLink program on the PC, by double-clicking on the CygLink desktop icon,
or by clicking on CygLink option in the CygLink program group from the Windows
Start
menu
If there is a valid connection from the Gauge to the PC, and the CygLink Comms-
settings are correct :
there will be a Green indicator in the bottom left of the window, with the message
Link OK
Viewing Measurements on the PC
28