Cygnus 1 Operation Manual page 31

Adjusting the Comms-settings using CygLink
Click on the File option on the menu-bar.
Move the cursor down, and click on Options...
Options
The
Change the
connected to
Change the
The Gauge is supplied with Baud Rate normally preset to 2400
For improved contrast in the Measurement Display - if you are using a Laptop with a
monochrome display : click on the
Click OK to close the
If the Comms-settings are correct th
will immediately change to Green
window will open – change settings as needed :
Port Number
to match the COM-port that the Gauge is to be
Baud Rate
to match the rate that the Gauge is preset for
Greyscale
Options
window, which will save the new settings
Viewing Measurements on the PC
button in the
e Red indicator in the CygLink main window
Display Optio ns
box
30