Cygnus 1 Operation Manual page 34

Remote-Logging
CygLink has a facility for remote-logging of Readings from the Gauge, which are than saved
directly to file :
Remote Datalogging :
see : Remote-Logging to Datalogger Files, page 68
Readings can be saved to any of the Datalogger file-types which have been
created using CygLink
see : Creating Template-Files Using CygLink, page 52
A separate Logging window opens, which displays all of the current Readings,
with controls to navigate to anywhere within the structure of the datalogging file -
which allows non-sequential datalogging
Readings are logged using an on-screen LOG button
Results can be converted to a printable Report file
see : Creating a Report File, page 48
Alternatively - Quick-Logging :
see : Quick-Logging, page 65
to collect measurements immediately, without the need to first create a new file :
Readings can be logged to a simple Quick-Logging file, which adds each new
Reading to an incrementing list
all of the logged Readings appear in a list within the main CygLink window
Readings are logged using an on-screen LOG button
Results can be printed immediately
Readings cannot be logged unless there is a valid datalink from the Gauge: the
button is greyed-out if there is no link, or if the link becomes lost
Viewing Measurements on the PC
LOG
33