Function Key - CipherLab M0010 Manual

Terminal Reference Manual

1.3.3 FUNCTION KEY

The [Func] (function) key serves as a modifier key.
1) To enable this modifier key, press
A circular icon of the letter "F" will appear on the status bar. This modifier key is
hold down as long as the icon is displayed.
2) Now press another key to get the value of key combination (say, press [1] to get
the value of F1). The icon will go off now.
3) To get the value of another key combination modified by the [Func] key, repeat
the above steps.
4) To abort the key modification, press
Note: It is not necessary to hold down the [Func] key.
The functionality of each key combination is application-dependent. Below is a list of
the factory setting for a variety of key combinations.
KEY COMBINATION
,
,
,
,
,
,
,
Note: Press the [Func] key first, and then press the second key for a specific function.
20
ACTION
PgUp (red-coded): move text up one screenful
PgDn (red-coded): move text down one screenful
Home (red-coded): move to the beginning of screen or
document
End (red-coded): move to the end of screen or document
Toggle ON/OFF the backlight of keypad only
Turn ON the backlight of LCD and decrease its luminosity
Turn ON the backlight of LCD and increase its luminosity
on the keypad.
again, and the icon will go off.