Cable Color Scheme; Cable Selection - IDTECK SR10/30V User Manual

1. LED
2. Buzzer
3. Connection Cable
4. Fixing Hole
5. Tamper Switch
4

Cable color scheme

Item
Power
Input
Output
Communication
Tamper
Not used
5

Cable selection

Item
Power (DC12V)
WIEGAND Output
Buzzer Control
LED Control
Tamper Output
RS-232 Cable
Displays the system operation status using red and green indicators.
Piezo buzzer.
Used to connect to the power or I/O cable.
Fixing hole for wall-mounting.
A tamper switch to detect falling from the wall.
Cable color Signal Line
Red DC + 12V
Black GND
Blue Buzzer control
Yellow LED control
Green Out Wiegand 0
White Out Wiegand 1
Purple RS-232 (TX)
Pink Tamper output (COM)
Light yellow Tamper output (NC)
Gray NC
Brown
Orange
Cable type
Belden #9409, 18 AWG 2 Conductor, Unshielded
Belden #9512, 22 AWG 4 Conductor, Shielded
Belden #9514, 22 AWG 8 Conductor, Shielded
Belden #9829, 24 AWG 2-twisted pair, Shielded
Description
DC +12V supplied
Earth-grounding for power
BUZZER control input port
LED control input port
Wiegand Data 0 Output Port
Wiegand Data 1 Output Port
RS-232 Transmission output port
Tamper output port
Tamper output port
Not connected
p.6
SR10/30V
Product introduction