Color Coded & Wiring Table - IDTECK SR10RW User Manual

eight inches (20cm) or less, a metal plate (for example: Reader isolation plate, metal wall)
must be placed between the readers. To obtain the maximum read range, mount each
proximity reader onto one or more Isolation Spacers.
Note
7. Color Coded & Wiring Table
Power Ground (GND)
ABA Track II CP Out
Wiegand Data 0 Out / ABA Track II Data Out
Wiegand Data 1 Out / ABA Track II Clock Out
* Cut out the tail connector before installation.
Two readers can simultaneously read the same badge or tag if the distance
between the two readers is less than 8 inches (20cm), back-to-back.
Signal
Main Power (+12V)
Buzzer Control In
LED Control In
Tamper Switch Out
RS232 (TX)
RS232 (RX)
RS485 (A)
RS485 (B)
Color
Black
Orange
Green
White
Yellow
Purple
Brown
8
Red
Blue
Gray
Pink
Cyan