Table of Contents
Advertisement
Installation and external connection
1
Installation
Inserted in the doorframe / attached to the wall
1. Two 6-32 or M3 holes are 3.3" (8.38 cm) away from each other vertically; between the
two exists one 1/2" hole through which the reader cables are arranged. The midway
hole is located 1.7" (4.31cm) down from the upper hole. (If the product is already
installed, you can skip this step.)
2. Insert the reader cables to the midway hole and fi x the reader module with two 6-32
or M3 screws.
3. Insert the reader module into the appearance case and tighten the screw (M6x8 mm)
using the hex wrench.
p.7
3
Advertisement
Table of Contents
