Exporting Device Information - Ricoh MP C2003 Series User Manual

• Counters
• Settings that can only be specified via Web Image Monitor or Web Service (for example,
Bonjour, SSDP setting)
• The file format for exports is CSV.
• The device configuration of the machine importing the device setting information file must be the
same as that of the machine, which exported the device setting information file. Otherwise, the
device setting information file cannot be imported.
• Import/export is possible between machines only if their models, region of use, and the following
device configuration match.
• Input Tray
• Output Tray
• Whether or not equipped with the duplex function
• Whether or not equipped with a finisher and the type of finisher
• Whether or not equipped with a hard disk
• Whether or not equipped with the Remote Machine function
• If the device configuration is changed, export the updated device setting information file.
• If there are machines with the same device configuration, you can specify their settings identically
by importing the same device setting file.
• If the home screen contains JPG image files, they will also be exported.
• While a user is operating the machine, nothing can be imported or exported until the user
completes the operation.
• During export and import, the machine cannot be otherwise operated.
• For details about SD card handling, see "Inserting/Removing a Memory Storage Device", Getting
Started.

Exporting Device Information

When exporting device information from the control panel, the data is saved on an SD card.
1. Insert an SD card into the media slot on the side of the control panel.
For details about inserting the SD card, see "Inserting/Removing a Memory Storage Device",
Getting Started.
2. Log in from the control panel as an administrator with all privileges.
3. Press [System Settings].
4. Press [Administrator Tools].
Managing Device Information
249