Ricoh MP C2003 Series User Manual page 221

Messages
"Cannot display preview of
this page."
"Cannot punch this paper
size."
"Cannot staple paper of this
size."
"Check paper size."
"Duplex is not available with
this paper size."
"Exceeded the maximum
number of sheets that can be
used. Copying will be
stopped."
"File being stored exceeded
max. number of pages per
file. Copying will be
stopped."
Messages Displayed When Using the Copy/Document Server Function
Causes
The image data may have
been corrupted.
The Punch function cannot
be used with paper size
selected.
The Staple function cannot
be used with paper size
selected.
An irregular paper size is
set.
A paper size not available in
Duplex mode has been
selected.
The number of pages the
user is permitted to copy has
been exceeded.
The scanned originals have
too many pages to store as
one document.
Solutions
Press [Exit] to display the preview
screen without a thumbnail.
If the selected document contains
several pages, press [Switch] on the
"Display Page" area to change the
page, and then a preview of the next
page will appear.
For details about paper sizes, see
"Specifications for Punch Unit (Internal
Finisher SR3130)", Maintenance and
Specifications.
Select an appropriate paper size. For
details about paper sizes, see
"Specifications for Internal Finisher
SR3130" and "Specifications for
Finisher SR3180", Maintenance and
Specifications.
If you press the [Start] key, the copy
will start using the selected paper.
Select an appropriate paper size. For
details about paper sizes, see
"Specifications for the Main Unit",
Maintenance and Specifications.
For details about how to check the
number of copies available per user,
see Security Guide.
Press [Exit], and then store again with
an appropriate number of pages.
183