Specifying Windows Authentication - Ricoh MP C2003 Series User Manual

Specifying Windows Authentication

Before beginning to configure the machine, make sure that administrator authentication is properly
configured under "Administrator Authentication Management".
1. Log in as the machine administrator from the control panel.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next].
5. Press [User Authentication Management].
6. Select [Windows Auth.].
If you do not want to use user authentication management, select [Off].
7. If you want to use Kerberos authentication, press [On].
If you want to use NTLM authentication, press [Off] and proceed to step 9.
Windows Authentication
45