Ricoh MP C2003 Series User Manual page 549

Tab
Administrator Extended Security
Tools Settings by SNMPv1, v2
Administrator Extended Security Driver
Tools Encryption Key:Encryption
Strength
Administrator Extended Security
Tools Authenticate Current Job
Administrator Extended Security
Tools Password Policy
Administrator Network Security Level
Tools
Administrator Service Mode Lock
Tools
Administrator Machine Data Encryption
Tools Settings
Item
Prohibit
See page 257 "Specifying the Extended
Security Functions".
AES
See page 257 "Specifying the Extended
Security Functions".
Access Privilege
See page 257 "Specifying the Extended
Security Functions".
"Complexity Setting": Level 1 or higher,
"Minimum Character No.": 8 or higher
See page 257 "Specifying the Extended
Security Functions".
Level 2
To acquire the machine status through printer
driver or Web Image Monitor, set "SNMP" to
Active on Web Image Monitor.
See page 125 "Specifying Network Security
Level".
On
See page 267 "Restricting a Customer
Engineer Operation".
Select [Encrypt], and then select [All Data] for
"Carry over all data or file system data only
(without formatting), or format all data.".
If [Encrypt] is already selected, further
encryption settings are not necessary.
See page 99 "Encrypting Data on the Hard
Disk".
Additional Information for Enhanced Security
Setting
269