Ricoh MP C2003 Series User Manual page 551

Category
Security User Lockout Release Timer
Lockout Policy
Security User Lock Out User for
Lockout Policy
Network SNMPv3 Function
SNMPv3
Security FTP
Network Security
Security S/MIME
Address Book User Certificate
Detail Input Add
User/Change
Email
• The administrator must indicate which strength level is to be specified for the encryption algorithm.
• For details about specifying an encryption algorithm and registering a user certificate, see
page 141 "Configuring S/MIME".
Item
Set to [Active] or [Inactive].
When setting to [Active], set the Lockout release
timer to 60 minutes or more.
For details, see page 69 "User Lockout Function".
When setting "Lockout Release Timer" to [Active],
set the Lockout release timer to 60 minutes or
more.
For details, see page 69 "User Lockout Function".
Inactive
To use SNMPv3 functions, set "SNMPv3
Function" to [Active], and set "Permit SNMPv3
Communication" to [Encryption Only]. Because
SNMPv3 enforces authentication for each
packet, Login log will be disabled as long as
SNMPv3 is active.
Inactive
Before specifying this setting, set "Network
Security Level" to [Level 2] on the control panel.
"Encryption Algorithm": AES-128 bit, AES-256
bit, or 3DES-168 bit
You must register the user certificate in order to
use S/MIME.
You must register the user certificate in order to
use S/MIME.
Additional Information for Enhanced Security
Setting
271