Detailed Assembly Procedures - Olympus BX-URA2 Instruction Manual

9-2 Detailed Assembly Procedures

@
Fig. 10
ƒ
...
Fig. 11
2
Attaching the Fluorescence Mirror Units
1. Using the Allen screwdriver, loosen the clamping screw @ at the right
side of the vertical illuminator.
2. Pull out the turret and place it upside down.
}Dummy mirror units ² are mounted in the mirror unit positions. Remove
the dummy mirror units from the positions you want to mount mirror units
by loosening the clamping screw ³ of each mirror unit using the Allen
screwdriver.
|
3. Hold the fluorescence mirror unit | to be mounted so that the model
name inscription on the side is upside down, align it with the mount
dovetail and insert all the way into the insertion position. Tighten the
clamping screw ƒ firmly.
# If the clamping screw ³ is loose, The turret will be unable to be
rotated due to interference with the cover.
4. Check the mount dovetail number ƒ and place the inscription sheet of
the mounted fluorescence mirror unit into the inscription pocket ... with
the same number on the front of the turret.
5. Mount other the required fluorescence mirror units by repeating the above
steps for each of them.
6. Place the turret in the original position and tighten the clamping screw @.
while pushing the turret in.
(Figs. 10 & 11)
³
²
31