Assembly; Assembly Diagram - Olympus BX-URA2 Instruction Manual

ASSEMBLY

9-1 Assembly Diagram

The diagram below shows the sequence of assembly of the various modules. The numbers indicate the order of assembly.
The module numbers shown in the following diagram are merely the typical examples. For the modules with which the
module numbers are not given, please consult your Olympus representative or the catalogues.
# When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching any parts
or touching glass surfaces.
Assembly steps enclosed in
}All assembly operations are possible by using the Allen screwdriver (
The Allen wrench (
the performance, have your Olympus representative conduct this work.)
· Parts marked with # can be attached only to the BX-URA2 universal illuminator.
NOTES
· Be sure to insert the sliders in the orientations shown in the diagram. Otherwise, they cannot be fitted in click
ND filters
U-25ND6-2
U-25ND25-2
U-25ND50-2
6-Position filter slider
U-RSL6
Turret
UV cut plate
30
will be detailed on the subsequent pages.
) provided with the illuminator is used only for clamping the screws inside the illuminator. (To retain
positions and engaged correctly in the light path.
Eyepiece
Exciter balancer
U-EXBABG
U-EXBAUB
U-EXBAUG
Vertical
illuminator
BX-URA2
BX-RFA
Fluorescence
mirror unit
Objectives/Revolving
nosepiece
Light shield sheets
Mercury burner
Observation USH-103OL
HBO103W/2
tube
Lamp housing
Illuminator
clamping screw
clamping
screws
Microscope frame
BX51TRF
Analyzer
U-AN
U-AN360-3
) provided with the microscope.
Power cord
Mercury lamp
housing
U-LH100HG
U-LH100HGAPO
Power supply unit
(for 100W mercury burner)
Rectangle field stop
BX-RFSS
6-Position filter slider
U-RSL6
Polarizer
U-PO3
6-Position barrier filter slider
U-RSL6EM