Install The Hard Drives In The Msa1000 - HP storageworks msa1000 Installation Manual

Install the Hard Drives in the MSA1000

Now that the MSA1000 and any additional storage enclosures are installed and
secured in the rack, you can install your hard drives into the drive bays.
For a list of the hard drives that are supported for use on the MSA1000, review the
MSA1000 Compatibility Guide, located on the MSA1000 Technical Documents
Web page at
To install the hard drives:
1. Remove the hard drive blank from the front of the MSA1000.
2
2
Figure 11: Removing hard drive blanks
MSA1000 Installation Guide
http://www.hp.com/go/msa1000.
Caution: Follow industry-standard practices when handling hard drives.
Press both of the ejector buttons 1 and slide the blank out of the drive bay 2.
Installation Procedures - for all MSA1000 Deployments
1
39