Obtaining The Msa1000 Firmware - HP storageworks msa1000 Installation Manual

Configuration Procedures - for Tru64 UNIX Environments

Obtaining the MSA1000 Firmware

To obtain the firmware file:
Note:
1. From Tru64 UNIX, log in as the root user and create a directory for the
2. Obtain the MSA1000 firmware file by doing one of the following:
82
The firmware filename varies depending on the version number.
MSA1000 firmware:
# mkdir /msa1000
Go to the Software, Firmware & Drivers page of the MSA1000 website at
http://www.hp.com/go/msa1000
Copy the most recent MSA1000 firmware file to the MSA1000 directory.
Record the firmware file name with the directory in the System
Information Table to complete the pathname.
Mount the CD-ROM drive and copy the firmware to the /MSA1000
directory:
MOUNT/OVER=ID <ddcn:>/UNDEFINED_FAT=STREAM_LF:326767
where is the device name of the CD-ROM on the OpenVMS
<ddcn:>
system. For example:
Copy the most recent MSA1000 firmware file to a disk directory on a
system with access to the MSA1000.
# mount -rt cdfs /dev/disk/cdrom0c /mnt
# cp /mnt/<CD-ROM directory>/v3<xxxxx>.bin
/msa1000/v3<xxxxx>.bin
Record the firmware file name with the directory in the System
Information Table to complete the pathname.
.
DQA0: or DKA400:
MSA1000 Installation Guide