Select The Storage Configuration Tool To Use; About The Command Line Interface - HP storageworks msa1000 Installation Manual

Installation Procedures - for all MSA1000 Deployments

Select the Storage Configuration Tool to Use

Depending on your operating system and your preference of user interfaces, use
one of the following provided tools to configure the MSA1000:
If you have not already done so, obtain the reference manual for the storage
configuration tool you choose to use.
For information about the CLI, read the HP StorageWorks Modular Smart Array
1000 Command Line Interface Reference Guide.
For information about the ACU, read the HP Array Configuration Utility
User Guide.
These manuals are available on the MSA1000 Support Documentation CD and the
Technical Documents page of the MSA1000 website at
http://www.hp.com/go/msa1000.
Note:
"Review MSA1000 Installation Best
configuration plan.

About the Command Line Interface

The Command Line Interface (CLI) is built into the MSA1000 firmware and can
be used to configure, manage, and monitor all aspects of the MSA1000, including
hard drive array configuration. The CLI is accessed by connecting the serial port
on a host computer or laptop computer to the customized RJ-45Z serial port on the
front of the MSA1000. The specialized CLI Configuration cable (part number
259992-001) is included in the shipping carton with the MSA1000.
All supported operating systems can use the CLI.
For information about using the CLI, read the HP StorageWorks Modular Smart
Array 1000 Command Line Interface Reference Guide. This manual is available
on the MSA1000 Support Documentation CD and the Technical Documents page
of the MSA1000 website at http://www.hp.com/go/msa1000.
54
Command Line Interface (CLI)
Array Configuration Utility (ACU)
Refer to "Plan How you Want to Configure your Storage" on page 18 and
Practices" on page 21 for help developing a
MSA1000 Installation Guide