Installation Procedures - For All Msa1000 Deployments - HP storageworks msa1000 Installation Manual

Installation Procedures - for
all MSA1000 Deployments
Installing and configuring your MSA1000 includes the following steps, each of
which is illustrated in
separate sections of this guide:
Note:
MSA1000 Installation Guide
Figure 1
Step 1: Reviewing your
Step 2: Preparing your
Step 3: Preparing your
Step 4: Installing the HBA in your
Step 5: Preparing your Switches &
Step 6: Installing Option Kits in your
Step 7: Installing your MSA1000 in the
Step 8: Connecting the
Step 9: Powering On your
Step 10: Configuring your
Please consider the following:
The MSA1000 must be installed in the sequence of steps listed in this guide. There
are specific dependencies and if you deviate from this sequence, you may have to
uninstall and then reinstall your MSA1000, beginning back at step 1.
Most of the text in this guide discusses preparing for and physically installing your
MSA1000. If your supplier is setting up your MSA1000 for you, provide them with
this guide. When you are ready to configure your MSA1000, review the
information in "Step 1: Reviewing your
"Step 10: Configuring your
on the following page and is discussed in the
Plans, page 15
Site, page 24
Servers, page 26
Servers, page 27
Hubs, page 28
MSA1000, page 29
Rack, page 30
Cables, page 41
MSA1000, page 48
MSA1000, page 51
Plans" on page 15 and then proceed to
MSA1000" on page 51.
1
13