HP storageworks msa1000 Installation Manual page 47

Connect the power cords to your MSA1000 in the following sequence:
1. Plug one end of the first AC power cord into an uninterruptable power supply
2. Plug the other end of the same AC power cord into one of the power supplies
3. Flip the cord lock lever on the back of the MSA1000 over the power cord to
4. The power supply automatically senses the input voltage. It is not necessary to
5. Plug one end of the second AC power cord into another uniterruptable power
6. Plug the other end of the second AC power cord into the redundant power
MSA1000 Installation Guide
or grounded outlet.
on the back of the MSA1000.
secure the connection.
select the correct main voltage.
supply or grounded outlet.
supply on the back of the MSA1000.
Flip the cord lock lever on the back of the MSA1000 over the power cord to
secure the connection.
The MSA1000 has sensed the power and is now in "stand by" mode.
Installation Procedures - for all MSA1000 Deployments
47