Configuring The Storage Arrays And Logical Volumes - HP storageworks msa1000 Installation Manual

Modular smart array
Hide thumbs Also See for storageworks msa1000:
Table of Contents

Advertisement

Configuration Procedures - for Linux Environments

Configuring the Storage Arrays and Logical Volumes

Planning the storage configuration is critical to the successful and efficient
deployment of any storage array system. As discussed in Chapter 1:
Procedures - for all MSA1000
about total system capacity, fault-tolerance, performance, and availability.
Note:
"Review MSA1000 Installation Best
configuration plan.
After your storage plan is developed, configure the storage by using your chosen
configuration tool. Depending on your server operating system and your
preference, available configuration tools include the ACU and the CLI.
For information on using the ACU to configure your storage, see the HP Array
Configuration Utility User Guide. This guide is available on the MSA1000
Support Documentation CD and the ACU website at
http://h18000.www1.hp.com/products/servers/proliant
storage/software-management/acumatrix/index.html.
For information on using the CLI to configure your storage, see the HP
StorageWorks Modular Smart Array 1000 Command Line Interface Reference
Guide. This guide is available on the MSA1000 Support Documentation CD and
the MSA1000 website at http://www.hp.com/go/msa1000.
Note:
for additional configuration information.
68
Refer to
"Plan How you Want to Configure your
In redundant-controller configurations, refer to your Secure Path documentation
Deployments", plans should include decisions
Practices" on page 21 for help developing a
"Installation
Storage" on page 18 and
MSA1000 Installation Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents