Attach The Mounting Rails To The Rack; Converting The Rack Rails For Round-Hole Racks - HP storageworks msa1000 Installation Manual

Attach the Mounting Rails to the Rack

The items supplied in the rail kit include:
1
2

Converting the Rack Rails for Round-Hole Racks

The rack rails ship configured for square-hole racks, but can be converted for use
in round-hole racks.
To convert the rack rails for use in a round-hole rack:
1. Locate the bag of miscellaneous hardware that ships with the rack rails and
2. Use a No. 2 Phillips screwdriver to remove the standard pins from the front
Note:
the pins from the ends of the rack rails. These load-bearing pins are designed to fit
through the holes without being removed.
MSA1000 Installation Guide
1
2
Rack rail (left)
Rack rail (right)
remove the eight round-hole pins.
and back ends of the rail.
See Figure 3 on the following page for the location of the pins.
Unless you are converting the rails for use in round-hole racks, do not remove
Installation Procedures - for all MSA1000 Deployments
Pins for round-hole conversion
3
3
31