Installing The Acu On Your Windows Management Server - HP storageworks msa1000 Installation Manual

Installing the ACU on your Windows Management Server

If you plan to use the ACU to configure the MSA1000, perform the following
steps to install it on the server that you have designated for management tasks:
1. Insert the MSA1000 Support Software CD into the CD-ROM drive of your
2. Agree to the license agreement.
3. Click Install Array Configuration Utility.
4. Click Install and follow the onscreen instructions to complete the installation.
5. Click Exit and remove the MSA1000 Support Software CD from the
6. From the desktop, click Start > Programs > Compaq System Tools >hp
7. Click Next and follow the on-screen instructions to set:
Note:
To launch the ACU and use it to configure your storage, see the
Utility User Guide
CD and the ACU website at
storage/software-management/acumatrix/index.html.
MSA1000 Installation Guide
management server and let it auto-start the installation program.
After the files have been copied, a completion message is displayed.
CD-ROM drive.
Array Configuration Utility > Set up hp Array Configuration Utility.
The browser-based Management Setup Wizard is opened.
Administrator, Operator, and User passwords
Device Trust Mode
Remote Access
Execution Mode
The ACU runs in the background. Its icon is displayed in the system tray.
. This guide is available on the MSA1000 Support Documentation
Configuration Procedures - for Windows Environments
http://h18000.www1.hp.com/products/servers/proliant
HP Array Configuration
59