Configuration Procedures - For Windows Environments; Prerequisites - HP storageworks msa1000 Installation Manual

Configuration Procedures - for
Windows Environments
Deploying the MSA1000 in a Microsoft
1. Installing the HBA Driver on your Windows Servers
2. Installing the ACU on your Windows Management Server
3. Identifying the Server and Operating System to the MSA1000
4. Configuring the Storage Arrays and Logical Volumes
Each of these procedures is discussed in the following paragraphs.
Note:
There are specific dependencies and if you deviate from this sequence, you may have to
uninstall and then reinstall your MSA1000, beginning back at step 1.

Prerequisites

Note:
of system requirements and options.
MSA1000 Installation Guide
The MSA1000 must be installed in the sequence of steps listed in this guide.
All equipment must be connected correctly, as detailed in the previous
sections in this document and the HP StorageWorks MSA1000 Configuration
Overview poster, included in the shipping carton with the MSA1000.
HP servers must have all ProLiant server drivers installed from the latest
SmartStart Servers CD.
Designated management server must be running Microsoft Internet Explorer v
5.0 SP2 or later.
See the MSA1000 website at
®
Windows® environment involves:
http://www.hp.com/go/msa1000
2
for a current list
57