Attaching The Rails In The Rack - HP storageworks msa1000 Installation Manual

Attaching the Rails in the Rack

Note:
including:
Locate the heaviest items, such as uninterruptable power supplies (UPS) and
additional storage enclosures near the bottom of the rack.
Locate the MSA1000 near the bottom of the rack, but high enough to easily read
the LCD panel on the front of the unit.
Install the hard drives into the MSA1000 and storage enclosures after installing the
MSA1000 and enclosure chassis into the rack.
1. Use the instructions provided on the rack template to mark the rack for rail
Figure 5: Using the rack template
Note:
MSA1000 Installation Guide
When installing items in your rack, follow industry-standard recommendations,
locations.
Identify the left (L) and right (R) rack rails by markings stamped into the rails.
Installation Procedures - for all MSA1000 Deployments
33