Install And Configure The Disk Array - HP StorageWorks XP48 Configuration Manual

Install and configure the disk array

Installation
The HP service representative performs these tasks:
• Assembling hardware and installing software
• Loading the microcode updates
• Installing the channel adapters (CHAs) and cabling
• Installing and formatting devices
After these tasks are finished, you will use Command View or LUN
Configuration Manager to complete the remaining tasks listed below. If
you do not have Command View or LUN Configuration Manager, your HP
service representative can perform these tasks for you.
The following restrictions apply when configuring any XP disk array with
an OVMS host:
• When an XP port is assigned to OpenVMS, that port may not be
shared with any other operating system.
• Multiple OpenVMS hosts may share the same XP port.
• Sharing of CHA microprocessors is not recommended.
19