To Determine Which Version Of The Msa1000 Controller Firmware To Use - HP storageworks msa1000 Installation Manual

To Determine Which Version of the MSA1000 Controller Firmware to Use

To determine if you can use the MSA1000 Controller firmware that was
preinstalled on your MSA1000 Controller or if you need to download and install a
newer or alternative version from the Web:
1. With your MSA1000 powered-on, use the arrow buttons on the front of the
2. Record the version of the controller firmware on your MSA1000 in
3. Go to the Software, Firmware & Drivers page of the MSA1000 website at
4. Under the Controller Firmware banner, select the entry for your server type
5. Read the screen display for the Web-version of the controller firmware and
6. If the Web-version of the controller firmware is a higher number than the
MSA1000 Installation Guide
MSA1000 Controller to scroll through the messages until the following
message is displayed:
00 Array controller Firmware ver <version>
MSA1000 Worksheets" on page 97 of this guide.
http://www.hp.com/go/msa1000.
or operating system.
record the Web-version of the firmware in
page 97 of this guide.
version provided with your MSA1000, follow the instructions provided on the
MSA1000 website to download and install this newer version of firmware on
your MSA1000.
Installation Procedures - for all MSA1000 Deployments
"My MSA1000
"My
Worksheets" on
53